Backhoe loaders can be utilized in various fields, such as: filling and excavation of roadbed works, cement concrete yard, aggregate/loading of asphalt mixture and other engineering operations. Of course, they can also be used for pushing soil, scraping the ground, pulling other machinery and other related operations. Backhoe loaders are mainly used in: mining, shoveling, transportation and other operations of construction machinery. With high efficiency, fast working speed, lightweight operation and good maneuverability, it has become a major type of earthwork construction machine in engineering construction.

Among them, the bucket is the common configuration of the backhoe loaders, and its selection is directly related to the use of the efficiency of the situation. Backhoe loaders can be configured with different buckets to accomplish different types of tasks.Side unloading bucket: complete the forward and side operation, according to the actual requirements of the field operation. Different side discharging can be realized by adjusting the side discharging cylinder; the secondary blade and the side plate of the bucket body are made of high wear-resistant and high-strength materials, which are adapted to the shoveling work of rocks and other dense materials.

Flat-edged rock bucket: rock shoveling, transferring and digging of primary soil after mine breakage. The main cutting edge is flat and straight, and it has high wear-resistant sub-cutting edge and bucket teeth. The bucket is characterized by high wear-resistant and high strength after analyzing and verifying the actual working conditions.

Sub-blade bucket: the high wear-resistant sub-blade plate bolted to the bottom of the main blade plate is utilized for replacement; it can slow down the wear and tear of the main blade plate to a greater extent, which not only improves the working efficiency of the two-end busy at the time of work, but also prolongs the service life of the bucket.

When the bucket cylinder is locked and the arm cylinder is lifting/falling, the connecting rod mechanism can make the bucket move up and down flatly or nearly flatly, so as to prevent the bucket from tilting and scattering materials; when the arm is in any position and the bucket rotates around the hinge point of the arm for unloading, the angle of the bucket tilting is ≥45°, and after unloading, the bucket can be automatically leveled off when the arm is descending.