PRODUCTS

HOT RECOMMENDATION

NEWS

CONTACT US

TEL

+86 0532 85778977

WHATSAPP

+86 130 2650 1385

E-MAIL

info@luyumachinery.com

Exp. Office Add

Excellence Century Center, Shibei District, Qingdao, China

Factory. Add

Shahe industrial park, Laizhou City, Shandong Province, China

920C Compact Wheel Loader
920C Wheel Loader, a powerhouse in the construction industry, boasts an impressive Engine Power of 36.8KW, Operating Weight of 1500kg, and a Bucket Capacity ranging from 0.7m3 .
EngineXinchai498(36.8KW)
Rated load1500kg  
Dumping heightDumping height  
Bucket capacity0.7m³  

920C Wheel Loader, a powerhouse in the construction industry, boasts an impressive Engine Power of 36.8KW, Operating Weight of 1500kg, and a Bucket Capacity ranging from 0.7m3 .

PARAMETERS

EngineXinchai498(36.8KW)
Rated load1500kg
Dumping heightDumping height
Bucket capacity0.7m³
Tire10-16
Unloading distance1120mm
Total weight3900kg
Size(L*W*H)5370*1810*2680mm
Bucket width1810mm
Arm thickness25mm
Boom center distance910mm
Cylinder size50/80mm
Cylinder size55/90mm
Thickness of upper plate20mm
Hinge plate25/16mm
Wheel track1510mm
Wheel base2140mm
Min.ground clearance260mm

DETAILS

1_333786.jpg

2_218154.jpg

7_980537.jpg


7_980537.jpg

5_695166.jpg

6_979715.jpg



ADVANTAGES

1. Clean the bucket: After use, the bucket of the 938 small wheel loader should be cleaned in time to remove the soil attached to the surface. Residue or other debris. Use water and a brush to clean the bucket and make sure it is completely dry to prevent rust.

2.Check the bucket regularly: Check the bucket regularly for wear and structural integrity. Pay attention to observe whether the cutting edge, side wall and bottom of the bucket have cracks, wear or deformation. If problems are found, repair or replace them in time.

3. Lubricating bucket: Key parts of the bucket, such as hinged points, connecting rods and sliding parts, should be lubricated regularly. Use appropriate lubricants and lubricate as recommended by the manufacturer to reduce friction and wear.

4. Check the bucket connection point: Check the fastening bolts and pins of the 938 small wheel loader bucket connection point to ensure that they are secure and reliable. If it is found to be loose or worn, tighten or replace it in time.


FAQ

1. Precautions for loader pre-start

Performing a pre-start check before operating the loader is a critical step to ensure safety and equipment performance.There are a couple of things to keep in mind.


2. Engine Oil Checks

In order to operate the equipment in good condition, the engine oil level should be checked daily before operating the loader.Please check according to the following


3. Use of Loader Battery

Many customers know to timely maintenance of the wheel loader's engine, hydraulic system and other key components, but especially easy to ignore the battery, the following points to do to effectively extend the service life of the battery

Inquiry

Our manager will contact you within 30 minutes of working hours.

SEND